Stroj za recikliranje taline iz polistirenske pene za vroče taljenje stiropora EPS

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine is a Styrofoam EPS recycling machine, which can smash the waste Styrofoam materials into small pieces by the blades and screw, nato pa bi ga bilo mogoče zlahka stisniti v tesne ingote pene v razmerju 90:1. Po zbijanju, odpadni stiropor se lahko ponovno uporabi za izdelavo drugih izdelkov, kot so okvirni izdelki in konstrukcijske letve.

Poleg tega, ustrezni materiali vključujejo tudi XPS, EPP, pladnji in skodelice za hrano. Wedo EPS recycling machine is able to eliminate all your waste foam recycling concerns.

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine to reduce the size of expanded polystyrene foam and expanded polypropylene foam for easier transportation. It is also called EPS densifier and EPS compactor. Široko se uporablja v obratu za predelavo morske hrane, elektronske tovarne, Trgovine z belo in črno tehniko, in supermarketi.

Description of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine:

1.Twin shaft crushing blades. This machine adopts manual feeding, the material will be crushed by blades on the twin shaft, then through the screen conveyed into the barrel of the main machine.

2.The screw of the main machine can convey and heat the EPS material to melting state, then extruding them and hydraulic blade cut them to pieces for easy storage and transportation.

3.The shapes of the products can be designed according to customers’ requirements.

Photos of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

2 overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

back of overview of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

screw heater of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

EPS from Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

melt EPS from Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine

Principle of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine:

The twin shaft are two parallel shafts with blades, they running in different rotation direction. Each shaft has blades and driven by the gear box, to crushing the EPS material then the material will get throught the sreen into the barrel. The material will be processed by the high speed rotary screw to the heating barrel. Then EPS material will be melt under high temperature and can extruding to expected shapes.

Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine for the environment:

1.EPS is uniquely recyclable – all manufacturing waste can be fully reprocessed as can the products at end-of-life.

2.EPS is comprised of 98% air and therefore only 2% polystyrene making it a highly efficient use of raw material.

3.Although EPS is derived from a non-renewable resouce – olje, it represents less than 0.1% of crude oil usage.

4.As EPS is highly energy efficient – the energy saved over the lifetime of an insulation panel.

Data of Polystyrene foam Hot Melting styrofoam densifier EPS melt recycling machine